3 Phase Evolution Boards
IPD offers 3 Phase Evolution distribution boards as a one stop solution for onerous design configurations in accordance with AS/NZS 61439. our Evolution distribution board range is built to suit indoor, outdoor and harsh environmental applications, designed for the ABB System pro M S200 range of protection devices. The series comes in compact and standard designs within the relevant ingress protection standards (IP43, IP65 & IP66).
Our 3 Phase Evolution boards include removable mounting plates, fully welded gutters, hinged escutcheon, split earth and neutral bars, full sized gland plates on both the top and bottom, wide choice of locking options and plenty of space to fully satisfy customer requirements. The circuitry features accessories such as RCD test switches, prewired circuits for external and emergency lighting control, split chassis for separate light and power metering and surge protection, inclusive of custom solution kits.
All the Evolution board range is available in sizes from 12 - 96 poles, available as standard with no main switch, a 250A switch disconnector, or a moulded case circuit breaker. Other options are available to suit your requirements. The Evolution range is available in Mild Steel ranging from 1.0mm to 1.2mm, with RAL7035 Grey or RAL2000 Orange for Evolution E43, 1.6mm Mild Steel with RAL7035 Grey or RAL2000 Orange for Evolution E65, and 1.6mm, Grade 316 unpainted Stainless Steel for Evolution E66 Stainless Steel. All ranges can be optionally resprayed into any colour.
IPD offers a range of accessories to cater solutions to complex design configurations for the range of Evolution Distribution Boards, which include electrical, locking, mounting and installation accessories. The electrical circuitry features accessories such as surge protection devices from DEHN, covering single phase and three phase applications with 2P+PE, 4P+PE and multipolar configurations, assuring high reliability due to thermo dynamic control SPD monitoring device with remote signalling. The Advanced Circuit Interruption technology in the DEHNguard M surge arrester improves the safety of electrical systems, the switch / spark gap combination in type 2 arrester makes upstream fuses superfluous. As a backup fuse is no longer required, you save time, space and material. The circuitry also features accessories such as RCD test switches, prewired circuits for external and emergency lighting control, split chassis for separate light and power metering. kWh power metering kits from ABB and SOCOMEC are inclusive of multifunction meter, CTs, fuses and all mounting equipment. Pad lockable lock covers and three-point locking rod accessories are available for E43 and E65 distribution boards, while padlock cover and lock linking adaptors are available for E66 distribution boards. Other door lock optional accessories are L handle, Swing Handle, T handle, coin locks, knob lock and plastic bung. Mounting and installation accessories consist of rain hood (Switchboard Cover), plinth and gland plates. Rain hood (Switchboard Cover) to suit E43 and E65 are available in grey and orange, while E66 is unpainted. They are offered with a depth of 200mm to suit E43/E65/E66 and, 300mm depth with width ranging from 600mm to 1400mm to suit E43 and E65. Gland plates are available in aluminum and brass with a thickness ranging from 3mm to 6mm while insulated gland plates are 6mm in thickness.
Browse our range of Evolution boards below. If you would like to find out more information about our Evolution distribution board products, get in touch with us on 1300 556 601 today.