<p>When it comes to safeguarding your electrical systems, a reliable surge protection device is essential. This particular Surge Protection Device (SPD) offers robust protection for industrial and commercial environments. Designed to operate efficiently at a rated voltage of 230 VAC and current of 20 A, it accommodates a three-phase power system, making it suitable for various applications.</p><p>The SPD features an intuitive LED status indicator per phase, allowing for easy monitoring of its operational state. With an IP20 degree of protection, this device is designed for indoor use where physical contact with live parts is limited.</p><p>Mounting flexibility is ensured as the SPD can be installed on both TS35 DIN Rail and panel setups. Its compact dimensions—126 mm in width, 69 mm in height, and 95 mm in depth—allow for seamless integration into existing systems without taking up excessive space.</p><p>Engineered to withstand harsh conditions, the SPD operates effectively within a temperature range from -40 to 70 degrees Celsius and supports humidity levels between 5% and 95%. The metal construction not only adds durability but also ensures long-term reliability under demanding circumstances.</p><p>Meeting international standards such as IEC 61643-11:2011, AS/NZS 1768:2007, UL 1449 (3rd Edition), and IEEE 62.41.2:2002 confirms its compliance with industry safety regulations. Weighing in at just 750 grams, this device combines solid performance with ease of handling during installation or maintenance tasks.</p><p>With response times less than five nanoseconds (L-N) and under one hundred nanoseconds (N-PE), the SPD provides rapid intervention against transient surges. It handles discharge currents up to an impressive 100 kA while maintaining a voltage protection level below 800 V—effectively shielding connected equipment from potential damage due to overvoltage events.</p><p>Protection modes include L-N (Line-to-Neutral), L-PE (Line-to-Protective Earth), and N-PE (Neutral-to-Protective Earth). This comprehensive approach ensures that all critical pathways are covered against surges originating from different sources.</p><p>Finally, boasting an interrupt rating of up to 100 A along with a fuse rating matching the rated current at 20 A further enhances its protective capabilities by ensuring safe operation even during high fault conditions. Rated short circuit current stands at a formidable capacity of up to25 kA providing additional assurance against unexpected electrical faults or overloads ensuring peace-of-mind when deploying this product within your infrastructure setup.</p>