Active Area |
Lateral |
Actuating Torque (Nm) |
0.15 |
Actuator Type to EN 50047 |
B |
Assured "OFF" Switching Distance (mm) |
15 | 18 |
Assured "ON" Switching Distance (mm) |
5 | 8 |
Bounce Duration |
Bounce duration in accordance with actuating speed |
Cable Note |
All indications including the conductor ferrules. |
Coding Level According to EN ISO 14119 |
Low |
Coding Type |
Universal coding |
Colour of The Front Ring |
Silver |
Design |
Straight |
Design of Control Element |
p-type |
Detection Ability for Test Bodies @ V = 1.6 m/s |
30 mm |
Direction of Motion |
Head-on to the active surface |
eCl@ss Number, Version 11.0 |
27-27-26-03 |
eCl@ss Number, Version 9.0 |
27-27-26-03 |
ETIM 6.0 |
EC002714 |
ETIM 7.0 |
EC011141 |
Explosion Protection Category |
3D | 3G |
Front Ring Material |
Aluminium |
Gross Weight (g) |
13.5 |
Height of The Protection Field (mm) |
890 |
Housing Construction Form |
Cylinder smooth |
Installation Conditions |
Arbitrarily |
Integral System Diagnostics Status |
Yes |
Latching Force (N) |
20 |
Lever Material |
Metal film |
Material of The Cable Mantle |
PVC |
Maximum Actuating Speed (m/s) |
1 |
Maximum Bounce Duration (ms) |
2 |
Maximum Electrical Power Consumption (W) |
10 |
Maximum Fuse Rating |
2 A gG D-fuse |
Maximum Holding Force (N) |
2600 |
Maximum Leakage Current (mA) |
0.5 |
Maximum No-load Supply Current (mA) |
100 |
Maximum Output Current (A) |
0.25 |
Maximum Permissible Installation Altitude Above Sea Level (m) |
2000 |
Maximum Protection Field (mm) |
20000 |
Maximum Reaction Time (ms) |
10 |
Maximum Relative Humidity |
85% |
Maximum Switching Capacity (W) |
1 |
Maximum Switching Frequency (Hz) |
5 |
Maximum Switching Voltage DC (V) |
250 |
Minimum Actuating Force (N) |
9 |
Minimum Actuating Speed (mm/min) |
120 |
Minimum Ambient Temperature (°C) |
-25 |
Minimum Positive Break Force (N) |
50 |
Minimum Protection Field (mm) |
4000 |
Net Weight (g) |
1715 |
No. of Actuating Directions |
4 |
No. of Auxiliary Contacts |
1 |
No. of Beams |
56 |
No. of Cable Wires |
4 |
No. of Safety Contacts |
3 |
Positive Break Travel (mm) |
2 |
Rated Control Voltage DC (V) |
24 |
Rated Operating Current (mA) |
4000 |
Rated Short-circuit Current (A) |
1000 |
Recipient Terminal Connector Type |
Connector plug M12, 8-pole |
Recommended Actuator |
BPS 300 | BPS 303 | BPS 303 SS |
Recommended Safety Switchgear |
SRB-E 301 |
Resistance to Shock (g/ms) |
110 / 4 |
Roller Material |
Plastic |
Sealing Type |
Form seals / Lip gaskets / Membrane |
Sensor Height (mm) |
1651 |
Sensor Length (mm) |
30 |
Spacing (mm) |
50 x 50 |
Switching Element |
Normally open contact (NO) |
Switching Principle |
Slow action |
Switchover Time |
Switchover time in accordance with actuating speed |
Switchover Time (ms) |
35 |
Tolerance |
10% |
Utilisation Category |
DC-13 | AC-15 |
Utilisation Category AC-15 |
230 VAC |
Utilisation Category DC-13 |
2.5 A, 24 VDC |
Wavelength of The Sensor (nm) |
850 |
Wire Cross-Section |
23 AWG |
Working Principle |
Electromechanical |
Brand |
SCHMERSAL |
Actuator Type |
Offset roller lever |
Cable Entry |
Without cable gland |
Cable Length (m) |
5 |
Connector Type |
Connector plug M12, 4-pole |
Contact Material |
Silver |
Degree of Protection |
IP67 |
Depth (mm) |
115 |
EAN |
4030660000000 |
Enclosure Coating Material |
Painted |
Enclosure Material |
Light-alloy diecast, paint finish |
Height (mm) |
189 |
Maximum Ambient Temperature (°C) |
80 |
Maximum Cable Cross Section (mm²) |
1 x 2.5 |
Maximum Switching Current (A) |
0.01 |
Minimum Cable Cross Section (mm²) |
0.25 |
Minimum Mechanical Life |
10000000 Operations |
Mounting Type |
Mounting flange |
No. of Normally-open Contacts |
1 |
Overvoltage Category |
3 |
Pollution Degree |
3 |
Rated Impulse Withstand Voltage (kV) |
6 |
Rated Insulation Voltage (V) |
500 |
Standards |
EN IEC 60947-5-1 / EN IEC 60947-1 |
Storage Temperature (°C) |
-25 to 70 |
Terminal Type |
Plug-in connection, top |
Version |
Round | Mushroom button |
Width (mm) |
295 |