Products

Position Switches & Sensors

SCHMERSAL MICRO SWITCH WITHOUT ACTUATOR M 6600-11-K-Y

Product Code: 101055341

Technical Specifications

Brand SCHMERSAL
Active Area Plastic
Actuating Torque (Nm) 0.15
Actuator Type to EN 50047 A
Bounce Duration Bounce duration in accordance with actuating speed
Cable Note All indications including the conductor ferrules.
Castor Diameter (mm) 20
Coding Level According to EN ISO 14119 Low
Coding Type Universal coding
Colour of The Front Ring Silver
Design Round
Design of Control Element p-type
Detection Ability for Test Bodies @ V = 1.6 m/s 30 mm
Direction of Motion Head-on to the active surface
eCl@ss Number, Version 11.0 27-27-01-03
eCl@ss Number, Version 9.0 27-27-01-03
ETIM 6.0 EC000030
ETIM 7.0 EC000030
Explosion Protection Category 3D | 3G
Explosion Protection Zones 22 | 2
Front Ring Material Aluminium
Gross Weight (g) 495
Height of The Protection Field (mm) 730
Housing Construction Form Cylinder thread
Installation Conditions Quasi-flush
Integral System Diagnostics Status Yes
Latching Force (N) 30
Lever Material Metal film
Material of The Cable Mantle PVC
Material of The Operators Aluminium
Maximum Actuating Speed (m/s) 1
Maximum Bounce Duration (ms) 2
Maximum Electrical Power Consumption (W) 10
Maximum Fuse Rating 6 A gG D-fuse
Maximum Holding Force (N) 2600
Maximum Leakage Current (mA) 0.5
Maximum No-load Supply Current (mA) 600
Maximum Output Current (A) 0.25
Maximum Protection Field (mm) 6000
Maximum Reaction Time (ms) 10
Maximum Relative Humidity 95%
Maximum Switching Capacity (VA) 120
Maximum Switching Frequency (Hz) 5
Maximum Switching Voltage DC (V) 24
Minimum Actuating Force (N) 9
Minimum Actuating Speed (mm/min) 60
Minimum Ambient Temperature (°C) -25
Minimum Positive Break Force (N) 40
Minimum Protection Field (mm) 300
Minimum Relative Humidity 30%
Net Weight (g) 15
No. of Actuating Directions 2
No. of Auxiliary Contacts 1
No. of Beams 32
No. of Cable Wires 4
No. of Safety Contacts 2
Positive Break Torque (Nm) 0.6
Positive Break Travel (mm) 3.5
Protection Class of Operating Resource 3
Rated Control Voltage DC (V) 24
Rated Operating Current (mA) 4000
Rated Short-circuit Current (A) 1000
Recipient Terminal Connector Type Connector plug M12, 5-pole
Recommended Actuator BPS 40S-2 | BPS 40S-1-C | BPS 40S-2-C
Recommended Safety Switchgear SRB-E 301
Resistance to Shock (g/ms) 30 / 11
Roller Material Plastic
Sealing Type Form seals / Lip gaskets / Membrane
Sensor Height (mm) 90
Sensor Length (mm) 13
Spacing (mm) 40 x 50
Switching Element Opener (NC)
Switching Principle Slow action
Switchover Time Switchover time in accordance with actuating speed
Switchover Time (ms) 35
Tolerance 10%
Utilisation Category DC-13 | AC-15
Utilisation Category AC-15 230 VAC
Utilisation Category DC-13 2.5 A, 24 VDC
Voltage Type DC
Wavelength of The Sensor (nm) 880
Wire Cross-Section 23 AWG
Working Principle Magnetic drive
Actuator Type Roller lever
Cable Entry 3 x M16 x 1.5
Cable Length (m) 1
Connector Type Connector plug M12, 4-pole
Contact Material Silver
Degree of Protection IP67
Depth (mm) 60
EAN 4030660000000
Enclosure Coating Material Nickel-plated
Enclosure Material Aluminium
Height (mm) 103
Maximum Ambient Temperature (°C) 55
Maximum Cable Cross Section (mm²) 2.5
Maximum Switching Current (A) 0.01
Minimum Cable Cross Section (mm²) 0.75
Minimum Mechanical Life 1000000000 Operations
Mounting Type Snaps onto standard DIN rail to EN 60715
No. of Normally-open Contacts 1
Overvoltage Category 3
Pollution Degree 3
Rated Impulse Withstand Voltage (kV) 4
Rated Insulation Voltage (V) 500
Standards EN IEC 60947-5-1 / EN IEC 60947-1
Storage Temperature (°C) -25 to 70
Terminal Type Screw terminals M20 x 1.5
Version Round | Push button
Width (mm) 40

Documents

Products to compare:
Comparing Products